This site is part of the Informa Connect Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 3099067.

IDS Toronto Exhibitor Kit
January 19-22, 2023
IDS Toronto Main Floor Exhibitor Kit
Menu

January 19-22, 2023
IDS Toronto Main Floor Exhibitor Kit

IDS Main Floor Exhibitor Kit.


YOUR BOOTH SPACE DOES NOT INCLUDE WALLS, LIGHTING, ELECTRICITY or FLOOR COVERING*. Refer to the Service Order Forms page to make these arrangements.  (*If you purchased a turnkey booth or a booth within Studio North or Prototype you may have walls, signage and flooring provided. If you are an exhibitor in one of the above sections, please review your individual booth contract.)

No display may be arranged so that an exhibitor must stand in the aisle in front of the booth to conduct business. No merchandise, chairs, tables, lights, signs or other exhibitor items may extend into the aisle. The handing out of company marketing materials anywhere other than your contracted booth space is prohibited.

Booth designs that deviate in any way from the regulations listed below or from the Metro Toronto Convention Centre’s (MTCC) Facility Regulations (Notice to Exhibitors) or Fire Regulations must be submitted preshow for approval to Stephanie Heddon at Stephanie.Heddon@informa.com.


BOOTH RENDERINGS SUBMISSION

If you have not submitted your final booth rendering, please submit now to Catia Varricchio at Catia.Varricchio@informa.com.  All booth designs must be approved in advance of the show.

1) Walls.

Exhibitors are provided with floor space only. The booth fee does not include walls of any kind*. This means that each exhibitor is responsible for providing hard walls to create a separation from adjoining booths. Exhibitors can either bring their own hard wall system or rent from Stronco.
*If you purchased a turnkey booth or a booth within Studio North or Prototype you may have walls or structure included in your booth fee. If you are an exhibitor in one of the above sections, please review your individual booth contract.

Booth drape is not allowed and exhibitors cannot use a neighbour’s exposed walls as a backdrop. In some cases, display elements may meet the criteria for separating walls. Show Management reserves the right to mask unsightly areas at the expense of the exhibitor. 

NEW THIS YEAR: Walls should be 8'h. If you have a common wall with another exhibitor (this includes back walls and side walls), it must be 8’ in height. You must not build your display over 8’ if you have an adjoining wall with another exhibitor. Side walls, in addition to being 8’ in height, must also extend all the way to the aisles; refer to the booth illustrations here.

If you have an island your height restriction is 12’. Above that height, written approval must be obtained from Show Management. In addition, exhibitors planning to go above the 12’ restriction may be required to have engineered, stamped exhibit drawings. Exhibitors who are unable to produce engineered drawings in their own offices may submit their exhibit drawings to Stephanie Heddon at Stephanie.Heddon@informa.com for submission to the MTCC for approval before building or committing to the final drawings.

NOTE: Please refer to the MTCC Notice to Exhibitors for additional booth regulations that must be adhered to.


Hard Wall Order Form  show code: 510034546
Earlybird Deadline: March 12, 2022

2) Floor Covering.


The cost of booth carpet/floor covering is not included in the booth rental. Exhibitors must bring or rent floor covering from Stronco (except those exhibitors in Studio North). Painting, nailing or drilling of floor is not permitted. Exhibitors wishing to lay tile or other floor covering, or build any structure, may not adhere it directly to the building floor. It is required that building paper, plastic sheeting, or some other suitable protection be laid on the building floor. If two-sided tape is used, it must be completely removed by the exhibitor during move-out. Exhibitors must not use masking tape, clear packaging tape or duct tape to adhere the covering to the show floor. The recommended tape is Scapa Tape which is a high-adhesion double-sided cloth tape commonly used at trade shows; it leaves almost no residue upon removal. Scapa Tape is available from Pillar Tapes Ltd. or National Hardware Sales Ltd.

Upon removal of each booth, the MTCC and Show Management will inspect each space for any damages incurred by the exhibitor and check that all materials, including tape residue left on the floor, are properly removed. Any charges to make good the exhibit space will be passed on to the exhibitor.

NEW THIS YEAR: There is no aisle carpet at the show. All Informa shows are making changes towards creating more sustainable events. Part of our efforts will include eliminating the aisle carpets. We recommend that your booth design includes flooring or floor covering for comfort and so that your space is delineated from the aisles.

AVOID TRIP HAZARDS: Exhibitors with raised floors must remember that they are limited to a maximum height of 6″. In addition, all concealed wiring must be quickly accessible for emergency service. If you plan on installing raised floors in your booth, they must be non-hazardous and wheelchair accessible. Wheelchair ramps must be at least 3′ wide with a maximum slope of 1:12 (i.e. a 6″ rise would require a 6′ run). Landings must be provided at tops and bottoms of ramps and must be at least 36″ wide by 60″ and free of obstructions. Ramps must be curbed or guarded at their edges and surfaces must be firm and slip-resistant. There must also be a ramp at every 100 feet. Please note the full extent of any ramp must fall within your assigned booth space and cannot extend into the aisles. Exhibitors should ensure they build any raised floors with these requirements in mind.

Any flooring with a height of 3/8" or greater will require a transition strip.

Each exhibitor must stay within their contracted booth size; this includes all floor coverings.


Carpet Order Form  show code: 510034546 
Earlybird Deadline: March 12, 2022

3) Booth Types.

Click on an image below to enlarge it:


(Note: these drawings do not reflect Studio North dimensions)

4) Lighting.


Please be advised that you must provide lighting for your booth display. The overhead lighting at the MTCC will NOT be sufficient. You may bring your own lights or rent them from SHOWTECH using the link below. The lighting level inside the exhibit hall will be Level 1 (Level 3 being the brightest) throughout each day of the show.

Clip-on lights are NOT allowed to be used for booth displays (except for Studio North booths). We recommend renting Source 4 Par lights from SHOWTECH using the link below. 

For Studio North exhibitors only: if you have rented arm lights from SHOWTECH, they will provide the wooden strip necessary for installation.  If you are bringing your own arm lights,  you will need a 1″x1″ strip of wood to facilitate this lighting and will be responsible for installation and removal of this wooden strip.


Lighting Order Form
Earlybird Deadline:  March 16, 2022

5) Electrical.

All electrical services are provided exclusively by SHOWTECH Power and Lighting. Exhibitors are responsible for arranging their own electrical power which should be ordered in advance using the link below. Exhibitors are not allowed to install any electrical wiring devices on-site other than regular extension cords. All on-site hard-wiring and connections must be done by SHOWTECH electricians. Extension cords must be of the three-prong type (i.e. grounded) and must contain wires of the proper size to carry the electrical load.

Power and telecommunications are supplied via pairs of floor ports, located every 30′ on centre, north-south and every 30′ on centre running east-west. The floor ports are flush metal panels, approximately 3′ by 3′. Use flat wiring to deliver power and telecommunication from the floor port to a specific area of your display. Floor ports are indicated on the floor plan (coming soon) as a small open square symbol.

NEW THIS YEAR:  IDS will not have any aisle carpet. If you do not have a floor port in your booth, we recommend ordering Overhead Power Outlets to prevent floor cables leading into your space. 

Electrical Order Form
Earlybird Deadline:  March 16, 2022



Electrical Safety

Electrical Safety Code Requirements for all Exhibitors: It is a requirement of Rule 2-022 of the Ontario Electrical Safety Code, a provincial regulation, that any electrical equipment, which is being displayed, offered for sale or used in any show, convention, or similar exhibition MUST BE APPROVED. The authority for enforcing this regulation is vested in the Electrical Safety Authority. At a show, unapproved electrical equipment will only be permitted to be displayed (not energized) when the Electrical Safety Authority gives permission through the Permission to Show Application Form. Failure to comply with the Ontario Electrical Safety Code could result in charges under the Electricity Act.

Electrical Appliances in Booth Display
All wiring must be in done in an approved manner, acceptable to the latest edition of the Ontario Electrical Safety Code and the ESA inspector. The OESC and ESA will not accept:

  • open joints
  • joints that are taped
  • ungrounded wiring
  • improper box connectors

Any lighting or wiring that is not factory assembled must be approved by an accredited approval agency prior to move-in. Contact the Field Evaluation and Product Approval department of the ESA at 1-800-559-5356 to get information on approval agencies. Exhibitors will have to place an order with SHOWTECH for the in-house electricians to correct any deficient wiring; a standard hourly rate will be charged for this service. Exhibitors placing on-site orders to correct wiring that is not up to code will be worked on as soon as all pre-ordered orders are installed. It is strongly recommended that all wiring and lighting inspections and corrections be taken care of before being brought on site.

Electrical Products for Sale by Exhibitor (eg. lamps)
Any electrical product (e.g. lamps) being sold at the show must be CSA approved for parts AND assembly. Though all lamp parts might be CSA approved, when they are assembled together to make a new electrical product, it does not assure that this item has been assembled correctly or is electrically safe. Any new electrical product requires an inspection certificate. Contact the Field Evaluation and Product Approval department of the ESA at 1-800-559-5356 to get information on approval agencies.

Electrical equipment is considered to be approved if it bears the certification mark or Field Evaluation label of an organization that has been accredited by the Standards Council of Canada to approve electrical equipment. If these markings are missing, the equipment is considered to be unapproved. Since markings are updated regularly, visit the Electrical Safety Authority’s website for a current listing.

Exhibitors with unapproved electrical equipment that wish to display, but not connect or provide electricity to the equipment, must complete the Permission to Show Application Form and pay the fee indicated for each piece of unapproved electrical equipment that will be displayed but not energized. Exhibitors will be provided with a sales receipt that must be available to inspectors on show site at all times. The Permission to Show application does not permit the connection/energizing of unapproved electrical equipment.

6) Ceilings and/or Second Storeys.


Single-level booths with ceilings, two storey booths and booths with mezzanines require special approval, and in most cases, a building permit. A description of the proposed booth design must be submitted to Stephanie Heddon at Stephanie.Heddon@informa.com who will submit the description to the MTCC for approval. The MTCC will discuss these configurations with the Toronto Fire Prevention Division and/or Toronto Urban Development Services. Please refer to the MTCC’s Fire Regulations for additional information.

7) Signage.


All exhibitor signage must be confined to the exhibitor’s booth area and must not inappropriately block views of the rest of the show floor. Signage must be professionally printed and mounted.

IMPORTANT NOTE: No roll-up banners/pop up booths are permitted on the show floor. See the examples below.

 

 

8) No Overhead Trade Banners.

No overhead trade banners or halos are permitted to be hung/installed above your booth. See the examples below.

Installations and lighting are welcome at the approval of Catia Varricchio, Catia.Varricchio@informa.com

9) Sale Signs.


At no time will SALE signs, SHOW DISCOUNT signs, SHOW SPECIAL signs, or others of this nature be permitted on the exhibit floor. Show management will ask you to remove the signs if they are on display.

10) Suspended Installations.

Suspended installations are welcome, please send to Catia Varricchio at Catia.Varricchio@informa.com for approval. All suspended installations must be installed by the exclusive rigging supplier, SHOWTECH.  For more information, please read the MTCC's Rigging/Overhead Work Policy.  To order overhead work for your booth, contact Ralph Scali, SHOWTECH Manager, at rscali@showtech.ca or call 416-585-8500.

11) Soliciting.


Distribution of samples, souvenirs, or literature must be confined within the exhibitor’s booth space. Absolutely no solicitation is allowed in the aisles, at any show or building entrance, or anywhere on the grounds of the MTCC. This includes solicitation by costumed personnel.

12) Furniture & Accessory Rentals.

A limited selection of furniture is available from Stronco Show Services and can be ordered using the link below. Rented draped tables and draped platforms are not permitted. NOTE: IDS supports original design. Please ensure all furniture is the original design and not a copy.


Furniture Rental Order Form  show code: 510034546
Earlybird Deadline: March 12, 2022

13) Water/Plumbing.


Water line connections or fill and drain service can be ordered using the SHOWTECH link below. Floor ports that house water supply are spaced every 30 ft. on centre throughout the show floor.


Water/Plumbing Order Form
Earlybird Deadline:  March 16, 2022

14) Propane Gas.

Exhibitors wishing to display any equipment that is fueled by propane must receive permission from the MTCC 30 days prior to show date. Download the Propane Cylinders, Butane & Natural Gas Appliances permission form below and submit as directed to the MTCC Safety Compliance Manager at FireSafetyReply@mtccc.com


Propane Cylinders, Butane & Natural Gas Appliances Permission Form
Deadline: March 1, 2022



Once approval has been granted, the exhibitor can then place their propane service order through SHOWTECH by contacting Ralph Scali at rscali@showtech.ca

Note, natural gas is not available in the south building.

15) Cleaning.

Aisles and common areas within the show will be cleaned daily. Exhibitors are responsible for the appearance of their own booths. Exhibitors must make arrangements for all booth cleaning, and are required to use the janitorial services of the MTCC for all booth cleaning, including vacuuming of booths prior to show opening. Janitorial services (carpet shampooing, vacuuming, dusting, and garbage removal) are available to order using the link below . Please note, cleaning is an exclusive service provided by the MTCC and exhibitors cannot bring their own cleaning staff.

At the end of the show, exhibitors are also responsible for removing all garbage and debris from their booth upon moving out of the MTCC. There will be a bulk garbage removal fee charged to the exhibiting company if this is not adhered to. This will be billed directly to the exhibitor, with payment due 30 days after the invoice is submitted.


Booth Cleaning Order Form
Earlybird Deadline:  March 21, 2022

16) Occupational Health and Safety.

Exhibitors and their contractors must comply with the legislation contained in the Occupational Health & Safety Act (the green book) and its applicable regulations.  The Ministry of Labour has deemed the show floor a construction site during move-in and move-out.  As a result, there are three areas we will require your compliance on:


1. Personal Protective Equipment:

Anyone working or visiting the show floor during move-in and move-out regardless of their booth size or location on the show floor MUST wear the following:

  • CSA approved hard hat (bicycle helmets are not allowed)
  • CSA approved steel-toed safety shoes (look for the green triangular patch), toe caps are not allowed.
  • High visibility vest

This requirement is mandatory, and you will not be permitted to enter halls D or E without your hard hat, safety shoes and vest. This requirement will be strictly enforced until such time all of the construction activity throughout the exhibit hall has been completed.  All other construction activity requiring the use of personal protective equipment such as safety glasses, gloves, fall protection, etc., will also be enforced.

Safety equipment can be found at the following locations (call ahead to be sure stock is available!):


2. Ministry of Labour Form 1000

All exhibitors are required to submit to us the completed Form 1000 (“Registration of Constructors and Employers Engaged in Construction”).  The form is to be completed by the employer who is constructing or building the booth. If the exhibitor is using their own staff to build the booth then they would complete the form with their own company information. If the exhibitor has hired a third-party contractor, then the contractor must complete the form.


Form 1000 (Mandatory)
Deadline:  March 18, 2022


3. Health & Safety Declaration Form 

All exhibitors are required to submit the Health & Safety Declaration Form by the appropriate deadline.


Health & Safety Declaration Form (Mandatory) (coming soon)
Deadline:  March 18, 2022
Please note: This form will not be available until early March do to expected COVID-19 mandate changes.

 

17) Installation.


Construction and installation of displays must be confined within the exhibitor’s booth space and is not permitted in the aisles. Construction that may cause disturbance or damage to other exhibits, such as strong paint fumes or excessive dust, is prohibited. The MTCC does not have collective agreements with labour, carpentry or painting unions, however, some work conducted in the exhibit hall must be performed or provided by Exclusive Suppliers only.

Stronco Show Services is able to provide install and dismantle labour; make arrangements via the Stronco Labour Order Form below.

Any exhibitor who plans to use an independent contractor(s) other than the IDS22 Official Suppliers must submit the Notice of Intent to Use Exhibitor Appointed Contractor (EAC) Form and a copy of the EAC’s certificate of insurance by by the appropriate deadline. The EAC must comply with the requirements and regulations listed on the form. EAC’s cannot perform the work of Exclusive Suppliers.


Installation and Dismantling Labour Order Form show code: 510034546
Earlybird Deadline:  March 12, 2022


Exhibitor-Appointed Contractor Form
Deadline:  March 18, 2022

18) Storage.

There is no complimentary storage at the MTCC during the show. Stronco Show Services will, if required, arrange for the removal and return of items needing storage (note, this is a paid service for which exhibitors are responsible unless they have booked the Material Handling services which includes storage of empty crates and pallets). All containers should be clearly marked with the exhibitor’s name and booth number.  Exhibitors who handle their own freight should complete the Stronco Storage Order Form below if they wish to arrange storage of empties or other material during the show. NOTE: exhibitors who have ordered Stronco Material Handling already have storage included with their order.


Storage Order Form show code: 510034546
Earlybird Deadline:  March 12, 2022


Material Handling Order Form show code: 510034546
Earlybird Deadline:  March 12, 2022

19) Environmental Considerations.


IDS is working to exceed the needs of the design community while limiting environmental harm. We are committed to strengthening our practices and assisting exhibitors in adopting sustainable thinking and a behavior shift. All exhibitors are encouraged to conceive of installations that can be reused or upcycled by using sustainably-sourced or creatively-recycled materials. Below are items to consider when designing your booth:

  • Avoid using drywall. Plywood or wood framing would be a better-suited, impermanent wall option with a longer life span. However, if reuse is not intended and donation is not possible, drywall is a better solution as it can be recycled, whilst plywood cannot. Painted/treated wood is not recyclable and instead goes into landfill.
  • Design with reuse in mind after the show.
  • Specify local materials (locally manufactured and/or raw materials).
  • Look out for materials with sustainability credentials, such as wood sustainably certified to the FSC or PEFC standards.
  • Use recycled materials or choose materials that can be recycled post-event.
  • Use rapidly renewable materials.
  • Choose construction methods that allow components to be taken apart and reused or donated (i.e no adhesive).
  • Avoid materials like styrofoam/polystyrene, PVC, fiberglass and high-VOC paints.

If you have sustainability suggestions to share with your fellow exhibitors, please send them to Megan.Mitchell-Downey@informa.ca so we can expand our list of best practices.

20) MTCC Material Donation Program and Recycling.

The MTCC and IDS have partnered with Habitat for Humanity to donate items rather than throw them out or ship them back post-show. Items such as; promotional items, samples, furniture and booth display materials. All of these items must be pre-approved by the MTCC to donate prior to the show opening. To get pre-approval and make arrangements for donations, please  the Sustainability Team at donations@mtccc.com . Note: The process will require photos of all items, prior to approval. 

The MTCC also has an aggressive waste reduction program in place in order to reduce landfill by recycling whenever possible.

Acceptable Donation Items (new or showroom condition)

  • Appliances & electronics
  • Windows & doors
  • Sinks, tubs, shower heads, faucets & bathroom vanities
  • Artificial flower arrangements – may be accepted if photos are first sent for approval
  • Framed photos & pictures
  • Lamps, light fixtures, ceiling fans and unopened packs of lightbulbs
  • Hardwood flooring – minimum 200 sq. ft. of each style
  • Tiles – minimum 100 sq. ft. of each design
  • Carpet tiles – complete carpet size (disassembled and stacked on skids)
  • Rugs
  • Bathroom hardware (towel racks, doorknobs)
  • Door hardware (locks, hinges, levers)
  • Cabinets & shelving
  • Furniture (dining room, bedroom, living room, patio)
  • Countertops & backsplashes
  • Home décor items (seasonal decorations, candles, vases, mirrors, flower pots)
  • Building materials (plyboard, nails, screws, fasteners, tools)
  • Paint & stain (up to 2,500 litres at one time)
  • BBQ & grills
  • Lawn & garden equipment
  • Pillows and mattresses (unsoiled and in a mattress bag – can be provided if needed)

21) Display Vehicles.


Absolutely no vehicles of any description are allowed to be displayed on the Show floor except for those of the IDS22 Car Sponsor.

22) Balloons.


Absolutely no balloons of any kind are permitted at IDS22.

23) Animals.


Absolutely no animals are allowed to be used within exhibitor booths as display props. If you believe the animal is necessary to sell your product you must request permission from Megan Mitchell-Downey, at Megan.Mitchell-Downey@informa.com. NOTE: service animals are allowed into all the areas of our event that are open to the public.

24) Internet Access.


There is no complimentary WiFi access on the Show Floor.  To order internet access, complete the  MTCC Internet link below.  Wireless Internet access for exhibitors includes unlimited wireless access for one computer or wireless device from anywhere within the Metro Toronto Convention Centre for the duration of the event. Access codes for additional computers or devices are available at a reduced cost. Wired Internet Access is also available.   Show Management, exhibitors and attendees are prohibited from providing or distributing any wired or wireless (including cellular-based and 3G/4G wireless access points) Internet access within the facility without permission from the MTCC. Any installations that have not been granted permission in advance will be subject to removal without compensation. Complimentary WiFi is available outside the exhibit halls in the lounge areas.


Internet Order Form
Earlybird Deadline: March 21, 2022

25) Food & Beverage Service and/or Sampling.


MTCC’s catering department has exclusive food and beverage distribution rights within the Metro Toronto Convention Centre. If unapproved food is brought into the MTCC it will be removed by the MTCC’s Beverage Manager and/or security.


In-Booth Catering.

Due to current provincial regulations regarding the consumption of food and/or beverage indoors, exhibitor booth catering from the Metro Toronto Convention Centre is not available or permitted at this year’s show.  This page will be updated should government regulations change.    All updates will also be noted in the What's New section of the HOME page.


Food and/or Beverage Sampling.

Due to current provincial regulations regarding the consumption of food and/or beverage indoors, food and/or beverage sampling is not currently available or permitted at this year’s show.  This page will be updated should government regulations change.  All updates will also be noted in the What's New section of the HOME page.


Liquor.

Alcohol is not permitted on the show floor unless purchased from the MTCC. If Alcohol is brought into the MTCC it will be removed by the MTCC’s Beverage Manager and/or security. Any liquor bottles that are being used for display purposes must be empty. If you wish to serve liquor to clients in your booth you can make arrangements with the MTCC at 416-585-8144 or catering@mtccc.com.

26) Dismantling Procedures.


Immediately after the show closes at 6:00pm on Sunday, April 10, 2022 exhibitors will be permitted to begin dismantling their displays.  All empty crates and boxes will be returned by Monday morning at 7:00 AM. Product is most vulnerable to loss during dismantling, and so never leave valuables unattended. The show’s general security is merely a presence to inhibit theft. Every item, whether exhibit material, brochures or trash, belonging to exhibitors must be removed entirely from the MTCC by 8:00pm on Monday, April 11, 2022. Should any exhibitor fail to remove all property by the time stipulated, then the exhibitor shall indemnify Show Management in respect to any claim thereby occasioned. Show Management shall be entitled, but not obliged, to remove such materials belonging to the exhibitor, who shall be liable for all loss and costs incurred. Read more about move-out here.

NOTE: All Turnkey, Studio North and Prototype exhibitors must move-out on Sunday, April 10 from 6:00pm-11:00pm.